Light4Me MADNESS TRI 3IN1 Svetlosni efekat

MADNESS TRI 3IN1 is a moving LED DMX lighting multi-effect for DJs, clubs and small stages that combines beam effects, a green laser and an amber strobe in one compact fixture. It works well at weddings, in dance halls, clubs, corporate events and on mobile stages when you need movement, color and rhythmic flashes without a complex lighting setup. For example, during the couple's grand entrance, you can launch an automatic show while the 360° Pan movement spreads light across the dance floor. Choose LIGHT4ME MADNESS TRI 3IN1 if you want to quickly create an energetic light show with DMX control, a wireless remote and sound-active operation.

Three effects in one fixture - more movement, color and rhythm on the dance floor
LIGHT4ME MADNESS TRI 3IN1 uses 12 Beam 3W R/G/B/W LEDs, a 100 mW green laser and a Golden Strobe 3x10W A, creating colorful beams, laser accents and warm golden flashes at the same time. The beam light source works in a red, green, blue and white color palette, so you can easily match the stage atmosphere to the music, room decor or party vibe.
The 0-360° Pan movement and three Tilt sections for the Beam effect with a 0-180° range help fill the dance floor, walls and space above the audience with light. The 0-100% linear dimmer allows smooth transitions from a subtle background to an intense finale, while the 0-20 Hz strobe makes it easier to highlight drops, vocal entrances and climactic moments of the show.

Easy operation - remote control, auto, sound and DMX depending on the situation
LIGHT4ME MADNESS TRI 3IN1 can be operated without a lighting console using the infrared remote control, auto mode or sound mode. Two automatic programs with speed adjustment and two sound-active programs with microphone sensitivity adjustment help you start the show after connecting the power.
For lighting operators, the fixture offers a 14-channel DMX mode, 3-pin XLR DMX data input/output connectors and master/slave operation. The capability to run a DMX signal line with up to 32 fixtures helps organize larger setups, while the 4-digit LED display with four buttons makes it easier to change settings, reset the fixture, control the display backlight and invert the screen orientation after overhead installation.

LED stage multi-effect for small and medium-sized events
The fixture reduces the need to bring several separate effects to small and medium-sized events. In one housing, you get the Beam, green laser and Golden Strobe effects, so you can set up the DJ booth faster, match the stage to the music more easily and change the lighting character efficiently between a calm background and a dynamic dance section.
Passive cooling through the housing supports quieter operation, which is important during conferences, intimate performances and breaks between sets. The IP20 protection rating means indoor use, so the fixture is best used in clubs, wedding halls, studios, community centers or on covered stages.

Technical specifications:

• Fixture type: moving LED DMX lighting multi-effect with wireless remote control and mounting bracket
• Light sources:
  • Beam: 12x3W R/G/B/W LED (R3/G3/B3/W3)
  • Laser: green 100 mW
  • Golden Strobe: 3x10W A LED
• Pan movement: 0-360°, adjustable speed
• Beam light source - Tilt movement: 3 sections, 0-180° range
• Beam light source color palette: RGBW (red, green, blue, white)
• Golden Strobe light color: A (amber)
• Dimmer: linear, full-range (0-100%)
• Strobe effect: 0-20 Hz, adjustable operating frequency
• Built-in shows: 6 shows
• Auto mode programs: 2 programs, adjustable program speed
• Sound mode programs: 2 programs, adjustable microphone sensitivity
• Control: automatic, DMX, infrared wireless remote control, manual
• Remote control battery: CR2025
• Control panel: LED display (7-segment, 4-digit) + 4 buttons
• Operating modes: auto, DMX, master/slave, sound
• DMX channels: 14
• DMX data connectors: 3-pin male XLR (input) / female XLR (output)
• Power connector: IEC C8 male (input)
• Multiple fixture linking capability (DMX signal daisy-chain): yes
• Maximum number of fixtures in a DMX line: 32
• Power cord length: 1 m
• Power supply voltage: AC 100-240V, 50/60 Hz
• Power consumption: 50W
• IP protection rating: IP20
• Cooling system: passive (through the housing)
• Display backlight control: yes
• Display orientation inversion: yes
• Device reset: yes
• Floor operation capability: yes
• Ceiling mounting: yes
• Bracket mounting holes: M4
• Housing material: ABS plastic
• Mounting bracket material: powder-coated iron
• Device color: black
• Package dimensions: 23.5 x 20.5 x 16 cm
• Net weight: 0.82 kg