Specifications

Microphone Inputs

• Type: XLR, electronically balanced
• Mic Input Noise (E.I.N.): 20 Hz to 20 kHz
• At 0 Ohm Source Impedance: -110 dB / 113 dB A-weighted
• At 50 Ohm Source Impedance: -110 dB / 113 dB A-weighted
• At 150 Ohm Source Impedance: -110 dB / 113 dB A-weighted
• Gain: +29 dB, +9 dB with pad
• Maximum Input Level: +12 dBu at 10 dB gain
• Impedance: 2.0 kOhm balanced
                   1.0 kOhm unbalanced
• Phantom Power: Switchable +48 V

Mono Input Channels

• Type: 1/4" TRS connector, balanced mono
• Impedance: Approximately 20 kOhm
• Maximum Input Level: +21 dBu

Stereo Inputs

• Type: 1/4" TS connector, unbalanced line
• Impedance: Approximately 20 kOhm
• Maximum Input Level: +21 dBu
• Equalizer: Low: 80 Hz / ±15 dB
                 Mid: 2.5 kHz / ±15 dB
                 High: 12 kHz / ±15 dB

Main Mix

• Noise: Main mix at -∞, channel fader at -∞: -90 dB / -94 dB A-weighted
            Main mix at 0 dB, channel fader at -∞: -77 dB / -86 dB A-weighted
            Main mix at 0 dB, channel fader at 0 dB: -73 dB / -79 dB A-weighted
• Frequency response (amplifier output): 20 Hz to 20 kHz (+0/-3 dB)

Amplifier

• Maximum Output Power: Per Channel: 250 W + 250 W

Speaker

• Output Connector: 1/4" TS connector
• Load Impedance: 4 to 8 Ohm

DSP

• Type: Klark Teknik
• Converter: 24-bit Sigma-Delta
• Sampling Rate: 40 kHz

General

• Display: 2-digit, 7-segment LED

Power Supply:

• Mains voltage: 100 to 120 V (for UL, JP, CA)
                        220 to 240 V (for EU, AU, UK, CN)
• Fuse: 100 to 120 V, T 5 A H 250 V
           220 to 240 V, T 3.15 A H 250 V
• Mains Connection: Standard IEC receptacle
• Dimensions: 305 x 450 x160 mm
• Weight: 6.8 kg