Cameo THUNDER WASH 600 RGB Strobe

Cameo THUNDER WASH 600 RGB — 3-in-1 Strobe, Blinder and Wash Light for Live Performance

The Cameo THUNDER WASH 600 RGB combines three classic stage-lighting roles — strobe, blinder and wash — into a single compact fixture, aiming to replace multiple dedicated units in one rig. Aimed at DJs, bands and small-to-mid live venues, the unit is part of the broader THUNDER Series and is designed to deliver full-colour lighting effects without the heat and running costs of traditional strobe tubes. The light ships in a rugged black metal housing with a universal mounting bracket and a pre-installed safety eye for overhead rigging.

All-in-One Effect Light: Strobe, Blinder and Wash from One Fixture

What sets the Thunder Wash 600 RGB apart is its hybrid design: 648 individually controllable LED points generate rapid strobe flashes, intense blinder punches and ambient colour wash out of the same panel. The additive RGB colour system mixes saturated primaries and pastel tones, while the cold, clean white produced from the RGB mix reportedly evokes the look of a classic xenon flash tube — something reviewers specifically noted during testing.

LED Light Source and Beam Coverage

The optical core of the light is a dense array of 648 RGB SMD LEDs, each rated at 0.2 W, producing a wide 80° beam angle that works well as a wall-washer across larger surfaces. Because of the high LED count, the panel reaches even colour mixing without visible colour fringing once the unit is set to white.

• With 648 × 0.2 W RGB SMD LEDs across a single dense panel, the unit delivers broad coverage suitable for both strobe hits and steady wash.
• Beam Angle: 80° — wide wash suitable for walls and audience blinders
• Colour System: RGB additive mixing — saturated primaries, pastels and clean white

Strobe Speed, DMX Modes and Control Options

For strobe effects, flash rate is continuously adjustable from 1 to 30 flashes per second, giving operators a usable range from slow dramatic pulses to fast crowd-blinding bursts. Eight DMX control modes cover dimmer, flash frequency and flash duration, while a built-in microphone enables sound-to-light operation and a four-button LED display with Mode, Enter, Up and Down handles manual setup.

• Flash rate runs from 1 – 30 Hz, adjustable via DMX or through the onboard menu.
• DMX Control Modes: 8 — including dimmer, frequency and duration
• Operating Modes: DMX, sound-active, master/slave, standalone — covers mixed rigs and one-off shows

Housing, Connectivity and Installation

Construction centres on a compact metal cabinet (335 × 93 × 182 mm) weighing 4 kg, supplied with a universal mounting bracket and locking screws for truss or floor positioning. DMX is handled through 3-pin XLR input and output sockets so multiple fixtures can be daisy-chained, while power is supplied via a standard IEC connector on universal mains voltage (AC 100–240 V, 50–60 Hz). The internal Class IP20 rating marks the light for indoor use only.

• DMX Connectors: 3-pin XLR male in / female out — standard daisy-chain linking
• Power Input: AC 100 – 240 V, 50 – 60 Hz — worldwide tour-ready mains
• At a rated draw of 130 W, the fixture runs cooler and cheaper than classic xenon strobe tubes on the same stage.
• Dimensions / Weight: 335 × 93 × 182 mm / 4 kg — flightcase-friendly rectangular form factor