Blackstar IDX-50 Električna gitara
The Blackstar ID:X 50 is a 50-watt digital modeling combo amp that packs six amp voices, 35 onboard effects, and patented ISF tone shaping into a single 1x12 cabinet. Power reduction down to 1W makes it apartment-friendly, while CabRig DSP delivers studio-grade cabinet simulation straight to a DAW via USB-C.
- Six amp voices from Clean Warm through OD2 cover sparkling cleans to high-gain saturation, all switchable on the fly.
- Patented ISF control morphs the EQ between British-voiced crunch and American-style punch without re-amping.
- Authentic EL84, EL34, and 6L6 valve responses let players revoice the entire power stage with one button.
- Three programmable channels and 99 patch slots mean every saved tone is one footswitch tap away on stage.
Blackstar ID:X 50 — 50W Digital Modeling Combo Amp
The ID:X 50 is a 50-watt digital modeling combo amp delivering six amp voices, 35 onboard effects, and patented ISF tone shaping from a single 1x12 cabinet. Power reduction scales output to 1W for silent practice, while CabRig DSP feeds a USB-C audio interface for direct recording. One compact enclosure replaces an entire pedalboard.
What sets this model apart
Two proprietary technologies define this amp. Blackstar's patented ISF sweeps the EQ continuously between British-voiced crunch and American-style punch, while CabRig is an IR-based DSP speaker simulator modeling cabinet, microphone, and room interactions in real time with zero latency. Switchable EL84, EL34, and 6L6 valve responses revoice the power stage from one button.
Power scaling and the Anthem 50 driver
Power scaling matters because a modeling amp should sound as good at whisper levels as it does at stage volume. This combo drops from 50W to 10W or 1W without tone collapse, and the 1x12 Anthem 50 speaker is voiced specifically to match the CabRig response curve.
- Power Output: 50 W — stage-ready headroom for rehearsals and small gigs
- Power Reduction: 50 W / 10 W / 1 W — three-position switch keeps tone intact at any volume
- The custom-voiced 12-inch Anthem 50 speaker is precision-engineered to perfectly complement CabRig profiles, ensuring authentic sonic depth for every preset.
Six voices, ISF, and switchable valve responses
Six preamp voicings span the full range from glassy cleans to saturated high-gain. A three-band EQ pairs with ISF for continuous tone-stack morphing, while the Response control swaps between EL84, EL34, and 6L6 power-stage emulations to revoice the entire amp character.
- Amp Voices: Clean Warm, Clean Bright, Crunch, Super Crunch, OD1, OD2
- EQ Section: Bass, Middle, Treble, ISF — three-band EQ plus patented ISF for British-to-American morphing
- Valve Responses: EL84, EL34, 6L6 — three switchable power-stage emulations
Onboard effects, CabRig, and studio-ready I/O
Over 35 onboard effects sit across four front-panel slots — Pre, Mod, Delay, Reverb — each with editable parameters visible on the OLED display. A full set of physical controls — Voice, Select Knob, Bank, Master, Mod, Dly, Rev, Tap, Response, Power, Level, Gain, Volume, Bass, Middle, Treble, ISF, and Manual — keeps every parameter one knob turn away. CabRig feeds the USB-C audio interface for direct DAW recording, with no Bluetooth in the signal path.
- Onboard Effects: 35+ effects across Pre, Mod, Delay, Reverb slots — pedalboard-grade processing without external gear
- Patch Memory: 12 onboard slots, 99 via Architect software — every saved tone one footswitch tap away
- Connect your gear via USB-C, 6.3 mm TS input, 3.5 mm line in, headphone output, or the integrated effects loop to handle all practice, recording, and performance needs.
Who should buy this instrument
This amp is the right choice for intermediate and gigging guitarists who want one amp to cover bedroom practice, home recording, and small-venue performances without hauling a pedalboard. Players stepping up from a Boss Katana or Line 6 Catalyst will find the valve-response switching and CabRig DSP a meaningful step up in feel and direct-recording quality. Bedroom players benefit most from the 1W power-reduction mode, which keeps the DSP in its sweet spot at whisper levels. Recording guitarists get a true USB-C audio interface with zero-latency cabinet simulation built in, eliminating the need for a separate load box or IR loader. The 9.6 kg weight and compact 470 x 409 x 221 mm footprint make it easy to carry to rehearsals and small gigs.
Blackstar Amplification — built in Northampton, England
Blackstar Amplification has been designing amps from its Northampton, England headquarters for nearly two decades, building a reputation among players who want stage-ready tools without boutique pricing. This model earned a Guitarist Choice Award from Guitar.com, with reviewer Elliot Oakley calling it "another benchmark" in the brand's affordable modeling-amp lineage.
Broj kanala
Zvučnici
Broj efekata
Efekat petlja
MIDI interface
Ugrađeni tuner
Da
Bluetooth
MP3 / Line In
Ulazni priključak nožnog prekidača
Izlaz za slušalice
DI izlaz
USB
Linjiski izlaz (Line-Out)
Da
Ulazi
Jack 6,3 mm TS
Paket sadrži
Nožni prekidač je deo paketa
Širina (mm)
470
Visina (mm)
409
Dubina (mm)
221
Težina
9,6 kg
Zemlja porekla
Kina
Dokumenti
Uputstva za korišćenje
Informacije o proizvođaču
Bezbednosna uputstva
Pogledaj uputstvo za upotrebu za detaljna bezbednosna uputstva za ovaj proizvod.
