Albanija
Argentina
Australija
Austrija
Belgija
Bosna i Hercegovina
Brazil
Bugarska
Crna Gora
Danska
Estonia
Filipini
Finska
Francuska
Grčka
Hrvatska
Irska
Italija
Južna Afrika
Kanada
Kolumbija
Letonija
Litvanija
Luksemburg
Mađarska
Meksiko
Moldavija
Nemačka
Nizozemska
Norveška
Novi Zeland
Poljska
Portugal
Rumunija
Severna Makedonija
Sjedinjene Američke Države
Slovačka
Slovenija
Srbija
Turska
Ujedinjeno Kraljevstvo
Ukrajina
Češka
Čile
Španija
Švajcarska
Švedska
MusicNomad MN801 Fret Shield Alat za održavanje gitare
Brend: MusicNomad
Kod proizvoda: 1313177
Brend: MusicNomad
Kod proizvoda: 1313177
MusicNomad MN801 Fret Shield Alat za održavanje gitare
The MusicNomad MN801 Fret Shield is a stainless steel fretboard protector guard built for 24.75-inch Gibson electric guitars. It slips over the fingerboard in seconds, replacing the slow masking-tape routine during fret polishing, leveling, and crowning work. The .008\" (0.20 mm) precision-cut steel is burr-free, fits all fret sizes from vintage narrow to modern jumbo, and lasts through hundreds of polishing jobs.
- Designed specifically for Gibson 24.75\" scale guitars with up to 22 frets
- Drop-down edges and included rubber bands hold the shield securely and conform it to any fingerboard radius
- Thin design allows for reaching the full height of the fret without leaving scratches, sanding marks, or gouges on maple or rosewood boards.
- Tested with power buffing wheels, polishing pads, sandpaper, and steel wool — built for repeated shop use
Fret Shield Fretboard Protector — Total Protection for Gibson Guitars
The MusicNomad MN801 Fret Shield is a patent-pending stainless steel fretboard protector guard sized for 24.75-inch Gibson electric guitars. Instead of spending minutes masking off the fingerboard with blue tape, this reusable guard drops into place in seconds and covers the entire board. The .008\" (0.20 mm) steel is burr-free with rounded edges, so it shields finished maple and unfinished rosewood boards without scratches.
Why Guitar Techs Switch from Tape
Drop-down edges and included rubber bands lock the shield down and conform it to any fingerboard radius. Fret slots fit vintage narrow to modern jumbo profiles on six-string guitars, and the steel holds up to power buffing wheels, polishing pads, sandpaper, and steel wool across hundreds of jobs. A laser-etched logo and size marking, combined with an integrated hang hole, ensure the tool remains bench-ready at all times.
Dokumenti
Bezbednosna uputstva
Pogledaj uputstvo za upotrebu za detaljna bezbednosna uputstva za ovaj proizvod.
