Kali Audio LP6-V2 Активни студијски монитор 1 kom
Brend: Kali Audio
Kod proizvoda: 833477
Brend: Kali Audio
Kod proizvoda: 833477
Kali Audio LP6-V2 Активни студијски монитор 1 kom
The Kali Audio LP-6 V2 Grey is a 6.5-inch powered studio monitor built around a bi-amped Class D platform that delivers brutally honest, ruler-flat sound for project and professional studios. Its 3-D Imaging Waveguide and low-noise front port produce a wide, three-dimensional soundstage with clean, articulate bass down to 39 Hz. Boundary EQ presets, LF/HF trims, and balanced XLR/TRS plus RCA inputs make it adaptable to nearly any room.
- Bi-amped 80 W Class D amplifier (40 W to each driver) for low noise floor and 20 dB of headroom
- 1-inch textile-dome tweeter paired with a 6.5-inch optimised paper woofer, crossed over at 1500 Hz
- Frequency response of 39 Hz - 25 kHz (-10 dB) and 115 dB maximum SPL for full-range monitoring
- Boundary EQ with eight placement presets plus LF/HF trim, tuned at The Village Studios in Los Angeles
Kali Audio LP-6 V2 Grey — Honest, Room-Adaptive Studio Monitoring
The Kali Audio LP-6 V2 Grey is a 6.5-inch powered studio monitor engineered to reveal every flaw and every strength in a mix without colouring the source. Its bi-amped Class D platform drives a 1-inch textile-dome tweeter and a 6.5-inch optimised paper woofer separately, lowering distortion a claimed 6 dB below the nearest competitor in its tier. Ruler-flat response from 39 Hz up to 25 kHz translates cleanly to cars, earbuds, and club rigs.
What Sets the LP-6 V2 Apart in Its Class
Two engineering choices separate this cabinet from the crowded sub-€500 field. The 3-D Imaging Waveguide shapes directivity so reflections match the direct sound, producing pinpoint instrument placement. Air exiting the low-noise front port tube moves at a single velocity, eliminating chuffing that muddies bass on most ported designs.
Driver Design and Amplification — Clean Power for Every Band
Splitting amplification between drivers gives the woofer and tweeter dedicated headroom, keeping distortion low when tracking loud sources.
- Total Power Output: 80 W — split 40 W to each driver
- High-Frequency Driver: 1-inch textile dome — smooth top end without the harshness that causes ear fatigue on long sessions
- Low-Frequency Driver: 6.5-inch optimised paper with oversized magnets and voice coils
Frequency Response and Headroom — Full-Range Reference
Reaching down to 39 Hz without a subwoofer means most bass-heavy material can be judged directly on this cabinet.
- Frequency Response (-10 dB): 39 Hz - 25 kHz — extends well beyond the audible critical band
- Frequency Range (±3 dB): 47 Hz - 21 kHz
- Maximum SPL: 115 dB — enough headroom for live tracking and loud playback without driver stress
Inputs, EQ, and Physical Form — Built for Real Rooms
Boundary EQ presets and front-ported design make this monitor flexible for bedrooms, edit suites, and treated control rooms.
- Inputs: XLR, 6.3 mm TRS, RCA — balanced and unbalanced options for any source
- Boundary EQ: 8 placement presets plus LF/HF trim, tuned at The Village Studios in Los Angeles
- Dimensions: 35.9 × 22.2 × 26 cm — compact enough for small desks; wall- and ceiling-mountable via Triad-Orbit hardware
Who Should Choose the LP-6 V2 Grey
Home-studio producers, project-studio engineers, and content creators who want a reference that exposes mix problems rather than flattering them are the natural audience for this monitor. Bedroom setups benefit most from the Boundary EQ presets, which tame bass build-up near walls. The LP-6 V2 is the right choice for anyone upgrading from entry-level cabinets who needs a flat, fatigue-free response for long sessions. Post-production editors gain pinpoint imaging for dialogue and music stems.
The Project Lone Pine Line and the LP-6 V2
Kali Audio's Project Lone Pine series targets engineers who want professional accuracy without flagship pricing, and the LP-6 V2 is the second-generation refinement of the original. The V2 update addressed the noise floor and re-tuned the Boundary EQ. Grey is a Sweetwater-exclusive colourway alongside Black and White.
Tip
Subwoofer pojačalo
40W
Vrsta HF zvučnika
Krajnje pojačalo za visokotonac
40W
EQ
Bluetooth
Raspon frekvencija
Vufer
Visokotonac
Snaga (Watt)
Snaga
Bas-refleks port
Frekvencija ukrštanja (kHz)
Boja
Boja prema proizvođaču
Grey
Količina paketa (kom)
Paket sadrži
Kabl za napajanje
Ponuđena konfiguracija
Samostalan produkt
Širina (cm)
35.9
Dubina (cm)
26
Visina (cm)
22.2
Neto težina (kg)
7
Zemlja porekla
Kina
Sve recenzije dolaze od proverenih kupaca koji su u prošlosti kupili proizvod od nas.
Dokumenti
Informacije o proizvođaču
Bezbednosna uputstva
Pogledaj uputstvo za upotrebu za detaljna bezbednosna uputstva za ovaj proizvod.
