Odaberi državu za dostavu paketa

Novo

MusicNomad MN813 Fret Leveler Alat za održavanje gitare

Kod proizvoda: 1313185

Novo
MusicNomad MN813 Fret Leveler Alat za održavanje gitare

Kod proizvoda: 1313185

Vreme isporuke ćemo navesti nakon naručivanja kod dobavljača.
Na osnovu porudžbine, pokušaćemo da nabavimo robu i kontaktiramo te sa datumom isporuke.
Alat za održavanje gitare MusicNomad MN813 Fret Leveler Alat za održavanje gitare

MusicNomad MN813 Fret Leveler Alat za održavanje gitare

€ 109
The MusicNomad MN813 Fret Leveler is a 3-piece diamond-coated U-File set that targets single high frets causing string buzz, without pulling all the strings off your guitar. The U-shaped channel slides under the string so you can spot-level the problem fret in seconds and hear the result immediately. Each set comes in a storage sleeve with hang...

MusicNomad MN813 Fret Leveler Alat za održavanje gitare

The MusicNomad MN813 Fret Leveler is a 3-piece diamond-coated U-File set that targets single high frets causing string buzz, without pulling all the strings off your guitar. The U-shaped channel slides under the string so you can spot-level the problem fret in seconds and hear the result immediately. Each set comes in a storage sleeve with hang holes.

  • Three file sizes — 3.2 cm, 5.1 cm, and 7.6 cm — cover any position on the fingerboard from the nut toward the body
  • Diamond-coated abrasive center cuts only the high fret, leaving the others untouched
  • Open-channel design works with strings on or off at full tension for instant playability testing
  • Stainless-steel construction with deburred edges protects your frets and finish, while the included storage sleeve keeps the set organized for workshop use.
Detaljan opis na vašem jeziku još uvek nije dostupan. Možda će ti opis na engleskom za sada pomoći.

MusicNomad MN813 Fret Leveler — Spot-Level Single High Frets

The MusicNomad MN813 Fret Leveler is a 3-piece diamond-coated U-File set that targets single high frets causing string buzz, without pulling every string off the guitar. The U-shaped channel slides under the string so the abrasive lands exactly on the problem fret.

Why the U-File design works

Three sizes — 3.2 cm, 5.1 cm, and 7.6 cm — cover any fret spacing from the nut toward the body. The stainless-steel body is hand-lapped flat with deburred edges, so it won't scratch frets or finish. Notches and arrows mark the cutting area, and the open channel lets you level a high fret with the strings still on at full tension. Compatibility extends to electric and acoustic guitars, bass (except the first five frets), banjo, mandolin, and ukulele.

Dokumenti

Bezbednosna uputstva

Pogledaj uputstvo za upotrebu za detaljna bezbednosna uputstva za ovaj proizvod.