RockBoard RBO B MOD ISO DC 1 Adapter
The RockBoard Power MOD ISO DC 1 is a multi-power supply for effects pedals that delivers up to nine electrically isolated 9V DC outputs plus a 5V USB-C charging port. It drops into the MOD slot on RockBoard pedalboards or mounts on top of or underneath most other boards thanks to a removable front plate. Eight 9V outputs deliver 300 mA each, a ninth pushes 500 mA for digital pedals, and the included 24V adapter with multi-regional plugs covers EU, UK, US/CA, and AU/NZ mains standards.
- 9 electrically isolated 9V DC outputs (8 × 300 mA + 1 × 500 mA) plus 1 × 5V USB-C (2,000 mA)
- External 24V mains transformer with 100–240V AC input and multi-regional plug adapters
- Individual short-circuit protection and status LEDs on every output
- Includes 9 RockBoard Flat Power Cables (60 cm) for immediate pedalboard setup
RockBoard Power MOD ISO DC 1 — Isolated Multi-Power Supply for Pedalboards
The RockBoard Power MOD ISO DC 1 delivers clean, isolated power to up to nine effects pedals from a single mains feed. It slots into the MOD bay on RockBoard pedalboards, and the removable front plate lets it mount on top of or underneath most other boards. An external 24V transformer combined with internal filtering keeps high-frequency noise out of the signal chain. Nine galvanically isolated 9V outputs plus a 5V USB-C port cover mixed analog and digital rigs.
Standout Features
Each 9V output is transformer-isolated, eliminating ground loops between pedals. Advanced filtering technology strips out high-frequency noise, while the external mains transformer keeps low-frequency interference away from the audio path. If a short circuit occurs on any output, only that slot shuts down — the rest of the rig keeps running.
Output Configuration
Eight 9V outputs deliver 300 mA each, covering standard analog and most digital pedals. A ninth 9V output pushes 500 mA for current-hungry digital processors, and a 5V USB-C port adds 2,000 mA for charging a phone or wireless bodypack on stage.
- Standard 9V Outputs: 8 × 9 V DC, 300 mA each
- High-Current 9V Output: 1 × 9 V DC, 500 mA
- USB-C Output: 1 × 5 V DC, 2,000 mA
Power Input and Adapter
The unit accepts 24V DC at 1.5 A through a barrel connector. The included 24V mains adapter carries interchangeable multi-regional plugs (EU, UK, US/CA, AU/NZ) and accepts 100–240V AC worldwide. Input polarity protection guards against reversed wiring.
- Input: 24 V DC, 1.5 A via barrel connector
- Adapter: 24 V DC, 1,500 mA with EU/UK/US/CA/AU/NZ plug adapters
- Mains Input: 100–240 V AC
Form Factor and Compatibility
With the front plate attached, the housing measures 175 × 85 × 47 mm and weighs 500 g — compact enough to mount under most pedalboards. Remove the front plate and the depth drops to 33 mm for mounting on top of or underneath a board. Two strain-relief clamps keep connected cables secure.
- Dimensions (with front plate): 175 × 85 × 47 mm
- Dimensions (without front plate): 160 × 85 × 33 mm
- Weight: 500 g
- Mounting: MOD slot on RockBoard pedalboards, or top/under mounting on other boards
- Package Contents: Power supply, 24V adapter, 9 × RockBoard Flat Power Cable (60 cm)
Tip
Broj izlaza
Paket sadrži
Adapter uključen
Da
Širina (mm)
85
Dubina (mm)
175
Visina (mm)
47
Neto težina (kg)
0.5
Zemlja porekla
Kina
Dokumenti
Uputstva za korišćenje
Informacije o proizvođaču
Bezbednosna uputstva
Pogledaj uputstvo za upotrebu za detaljna bezbednosna uputstva za ovaj proizvod.
