The 350 Watt MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 600 Watt MIXPACK and 1000 Watt MIXPACK Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn't an easier, more affordable way to get this much clean power, mixing and Alesis DSP effects in one place. It takes only a few minutes from the time you bring MIXPACK Express into the venue, to the time the gig powers on, and power on it will. MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top. The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack. If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.Features350 Watts of continuous powerLightweight, one-piece design for convenient transportTwo 10” speakers with cables includedBuilt-in mixer with seven-band graphic EQ and XLR, line and RCA inputsIntegrated Alesis DSP with 24-bit effects including reverb, delay and chorusSpecsMicrophone/Line Input: Electronically balanced, discrele input configurationFrequency Response: 10 Hz to 55 kHz, +/-3 dBuMicrophone Input Impedance: 3.9 kLine Input Impedance: 10kMicrophone Input S/N ratio: >94 dBuMicrophone Inputs: Balanced XLR connectors Line Inputs: Balanced / Unbalanced, 1/4' (6.3 mm) TRS jack connectorsTape Inputs: Unbalanced RCA jackInputs Distortion (THD & N): 0.04% at 0 dBu, 1 kHzChannel EQ High shelving: +/-15 dB @ 12 kHz Low shelving +/-15 dB @ 80 Hz Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor OutDSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinationsMaster Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHzMonitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack Speaker Section System Type 2-way coax vented boxFrequency Response 65 Hz - 20 kHz at -10 dBSpherical horn Coverage 70° H × 70° VContinuous Power 150 Watts AES StandardPeak Power 300 Watts PeakProtection Electronic circuit on driverSpeaker Specification 10" (254 mm) Low Frequency Driver / 2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium HighInput Connectors 1/4" (6.3 mm) mono (TS) jack on each cabinet.Amplifier Section Output Power 350 Watts (EIAJ) Impedance 4Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling.